Quick Release Sector Transfer
From Just Solve the File Format Problem
(Difference between revisions)
| Line 9: | Line 9: | ||
QRST files start with the 4-character ASCII string <code>QRST</code>, followed by a <code>0x00</code> byte. The first character of the file extension is an underscore, followed by a 2-digit hexadecimal volume number. | QRST files start with the 4-character ASCII string <code>QRST</code>, followed by a <code>0x00</code> byte. The first character of the file extension is an underscore, followed by a 2-digit hexadecimal volume number. | ||
| + | |||
| + | == Structure == | ||
| + | |||
| + | === File header === | ||
| + | The file begins with a 796-byte header: | ||
| + | |||
| + | {| class="wikitable" | ||
| + | ! Offset | ||
| + | ! Size | ||
| + | ! Description | ||
| + | |- | ||
| + | |0x00 || 5 bytes || Magic number, <code>QRST</code> followed by <code>0x00</code> | ||
| + | |- | ||
| + | |0x08 || 4 bytes || Checksum | ||
| + | |- | ||
| + | |0x0C || 1 byte || Disk capacity: | ||
| + | {| class="wikitable" | ||
| + | ! Value | ||
| + | ! Meaning | ||
| + | |- | ||
| + | |0 || unknown | ||
| + | |- | ||
| + | |1 || 360k | ||
| + | |- | ||
| + | |2 || 1.2M | ||
| + | |- | ||
| + | |3 || 720k | ||
| + | |- | ||
| + | |4 || 1.4M | ||
| + | |- | ||
| + | |5 || 160k | ||
| + | |- | ||
| + | |6 || 180k | ||
| + | |- | ||
| + | |7 || 320k | ||
| + | |} | ||
| + | |- | ||
| + | |0x0D || 1 byte || Current volume number in set | ||
| + | |- | ||
| + | |0x0E || 1 byte || Count of volumes in set | ||
| + | |- | ||
| + | |0x0F || 96 bytes || Description, ASCIIZ | ||
| + | |- | ||
| + | |0x4B || 721 bytes || Disk label, ASCIIZ | ||
| + | |} | ||
| + | |||
| + | === Tracks === | ||
| + | The header will be followed by the data tracks. These can be in one of three forms: | ||
| + | |||
| + | ==== Uncompressed track ==== | ||
| + | {| class="wikitable" | ||
| + | ! Offset | ||
| + | ! Size | ||
| + | ! Description | ||
| + | |- | ||
| + | |0x00 || 1 byte || Cylinder | ||
| + | |- | ||
| + | |0x01 || 1 byte || Head | ||
| + | |- | ||
| + | |0x02 || 1 byte || 0 indicates uncompressed track | ||
| + | |- | ||
| + | |0x03 || calculated from disk type in header || Track data, uncompressed | ||
| + | |} | ||
| + | |||
| + | |||
| + | ==== Blank track ==== | ||
| + | {| class="wikitable" | ||
| + | ! Offset | ||
| + | ! Size | ||
| + | ! Description | ||
| + | |- | ||
| + | |0x00 || 1 byte || Cylinder | ||
| + | |- | ||
| + | |0x01 || 1 byte || Head | ||
| + | |- | ||
| + | |0x02 || 1 byte || 1 indicates blank track | ||
| + | |- | ||
| + | |0x03 || 1 byte || Filler byte | ||
| + | |} | ||
| + | |||
| + | ==== Compressed track ==== | ||
| + | {| class="wikitable" | ||
| + | ! Offset | ||
| + | ! Size | ||
| + | ! Description | ||
| + | |- | ||
| + | |0x00 || 1 byte || Cylinder | ||
| + | |- | ||
| + | |0x01 || 1 byte || Head | ||
| + | |- | ||
| + | |0x02 || 1 byte || 2 indicates compressed track | ||
| + | |- | ||
| + | |0x03 || 2 bytes || Length of compressed data | ||
| + | |- | ||
| + | |0x05 || As specified above || Compressed data | ||
| + | |} | ||
| + | |||
| + | The compressed data stream consists of alternating literal runs (a byte giving the length of the run, followed by that number of bytes data) and compressed runs (two bytes; first gives number of repeats, second gives byte to repeat). | ||
== Sample files == | == Sample files == | ||
* [ftp://ftp.oldskool.org/pub/drivers/Compaq/Portable%20III/setup%20and%20diags/ Compaq Portable III setup and diagnostics] | * [ftp://ftp.oldskool.org/pub/drivers/Compaq/Portable%20III/setup%20and%20diags/ Compaq Portable III setup and diagnostics] | ||
Revision as of 01:01, 13 March 2016
The QRST disc image format was used by Compaq to distribute disk images of diagnostic software. The file QRST.EXE would be supplied with the disc images to write them to a floppy drive.
Contents |
Identification
QRST files start with the 4-character ASCII string QRST, followed by a 0x00 byte. The first character of the file extension is an underscore, followed by a 2-digit hexadecimal volume number.
Structure
File header
The file begins with a 796-byte header:
| Offset | Size | Description | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0x00 | 5 bytes | Magic number, QRST followed by 0x00
| ||||||||||||||||||
| 0x08 | 4 bytes | Checksum | ||||||||||||||||||
| 0x0C | 1 byte | Disk capacity:
| ||||||||||||||||||
| 0x0D | 1 byte | Current volume number in set | ||||||||||||||||||
| 0x0E | 1 byte | Count of volumes in set | ||||||||||||||||||
| 0x0F | 96 bytes | Description, ASCIIZ | ||||||||||||||||||
| 0x4B | 721 bytes | Disk label, ASCIIZ |
Tracks
The header will be followed by the data tracks. These can be in one of three forms:
Uncompressed track
| Offset | Size | Description |
|---|---|---|
| 0x00 | 1 byte | Cylinder |
| 0x01 | 1 byte | Head |
| 0x02 | 1 byte | 0 indicates uncompressed track |
| 0x03 | calculated from disk type in header | Track data, uncompressed |
Blank track
| Offset | Size | Description |
|---|---|---|
| 0x00 | 1 byte | Cylinder |
| 0x01 | 1 byte | Head |
| 0x02 | 1 byte | 1 indicates blank track |
| 0x03 | 1 byte | Filler byte |
Compressed track
| Offset | Size | Description |
|---|---|---|
| 0x00 | 1 byte | Cylinder |
| 0x01 | 1 byte | Head |
| 0x02 | 1 byte | 2 indicates compressed track |
| 0x03 | 2 bytes | Length of compressed data |
| 0x05 | As specified above | Compressed data |
The compressed data stream consists of alternating literal runs (a byte giving the length of the run, followed by that number of bytes data) and compressed runs (two bytes; first gives number of repeats, second gives byte to repeat).
