Floppy disk

From Just Solve the File Format Problem
(Difference between revisions)
Jump to: navigation, search
(→‎5 1/4 Inch)
 
(9 intermediate revisions by 2 users not shown)
Line 10: Line 10:
 
Formats for images of floppy disk data can be found at [[Disk Image Formats]].
 
Formats for images of floppy disk data can be found at [[Disk Image Formats]].
  
−
== 8 Inch ==
+
The main ways in which floppy disks could differ at a recording level:
−
[[File:floppy-disks-8in.jpg|thumb|upright|[[Some 8" floppy disks]]]]
+
* The physical dimensions and physical layout – the most common sizes were 8-inch, 5¼-inch (officially the metric 130 mm, but in common parlance referred to by its inch approximation even in countries which normally use the metric system), 3½ inch (likewise officially metric 90 mm, but commonly known by the inch approximation). Note those are the sizes of the actual magnetic disk, the jacket/cartridge is larger. However, there were many other rare sizes.
−
* DEC
+
* The method of data encoding: the earliest floppies IBM 8-inch floppies used [[FM encoding]]. Capacity was doubled, without changing the disks physically, by switching to the more efficient [[MFM encoding]]. The original FM encoded disks were called "single density", and the MFM encoded "double density". IBM PC 5¼-inch and 3½ inch floppies used MFM encoding; the term "double density" was later extended to "high density" and beyond, but this time it referred to changes in the magnetic material and type of disk heads rather than an encoding change. [[GCR encoding]] was also popular, particularly with systems such as Apple IIs and Commodore 64s. Some early "double density" drives used [[M2FM encoding]] (most notably Intel ISIS-II and HP 9885) which was later replaced by the simpler MFM.
−
** [[DEC RX01]]
+
* Magnetic recording material: more expensive media could store more data
−
** [[DEC RX02]]
+
* Type of magnetic disk heads: more expensive magnets could store more data
−
* IBM
+
* Speed of rotation
−
** [[IBM Type 1]] (33FD)
+
* Constant angular velocity (CAV) versus constant linear velocity (CLV)
−
** [[IBM Type 2]] (43FD)
+
* Number of sides – early disks and drives were single-sided only and could only record on one side of the disk; later disks and drives were double-sided and supported recording on both sides. There were also "flippy disks" where a single-sided drive could be used to record on both sides of a disk by the user manually flipping the disk to access the other side.
−
** [[IBM Type 2D]] (53FD)
+
* Longitudinal magnetic recording versus perpendicular magnetic recording: traditionally floppies used longitudinal; 2.88 MB floppy drives doubled the capacity over 1.44MB by switching to perpendicular
−
** [[IBM 23FD]]
+
* Sector size: the earliest floppies had 128 byte sectors; IBM PC floppies normally had 512 byte sectors. IBM PC floppy controllers could support any power of 2 from 128 to 4096. Rarely, different tracks on a floppy could be recorded with different sector sizes, or even a single track with a mix of different sector sizes.
−
** [[IBM 3740 format]]
+
* Gap length between sectors: reducing the gap length could squeeze more sectors on to the disk but at the risk of data loss
 +
* Format of track and sector headers, including CRC algorithms and any per-sector flags (e.g. IBM 3740 has a flag to mark each sector as "deleted", a feature carried forward into IBM PC floppy formats, but almost never used in them.)
 +
* Number of tracks per disk and number of sectors per track
 +
 
 +
A given combination of floppy disk controller, floppy drive, and disk, could generally support several different variations on the same basic format, but only within certain constraints – e.g. IBM PC floppies could be formatted with a non-standard sector size or number of tracks, but not with GCR or MMFM encoding (since the floppy disk controllers used in IBM PCs did not support those encodings).
 +
 
 +
The disk geometry, encoding, etc, is orthogonal to the filesystem – 1.44MB Apple Mac floppies were physically interoperable with IBM PC floppies, even though IBM PCs normally lacked software to read Apple's HFS filesystem; by contrast, the earlier 800KB and 400KB Apple Mac floppies were incompatible with IBM PC floppies, since IBM PC floppy drives could not physically read them, nor could those earlier Mac floppy drives physically read IBM PC floppies.
 +
 
 +
== 2 Inch ==
 +
* [[LT-1]]
 +
* [[Video Floppy]]
 +
 
 +
== 2 1/2 Inch ==
 +
* [[Sharp 2.5-inch floppy disk]]
 +
 
 +
== 3 Inch ==
 +
* [[CF-2 Compact Floppy Disk]]
 +
* [[MCD-1 Micro Cassette]]
 +
 
 +
== 3 1/2 Inch ==
 +
* Acorn
 +
** [[Acorn double density 3 1/2" disk]]
 +
** [[Acorn high density 3 1/2" disk]]
 +
* [[Akai Disk Format]]
 +
* Amiga
 +
** [[Amiga double density disk]]
 +
** [[Amiga high density disk]]
 +
* Apple
 +
** [[Apple double-density 3 1/2" disk]]
 +
** [[Apple high-density 3 1/2" disk]]
 +
* Brother
 +
** [[Brother 120k]]
 +
** [[Brother 240k]]
 +
** [[Brother HD]]
 +
* Commodore
 +
** [[Commodore 1581 disk]]
 +
* IBM PC and compatibles
 +
** [[PC-DOS 720K format]]
 +
** [[PC-DOS 1.44M format]]
 +
** [[PC-DOS 2.88M format]]
 +
* SAM Coupé
 +
** [[SAM Coupé disk]]
 +
* ZX Spectrum
 +
** [[ZX Spectrum Beta Disc 3.5" floppy]] (see [[TR-DOS filesystem]])
 +
 
 +
== 4 Inch ==
 +
* [[IBM DemiDiskette]]
  
 
== 5 1/4 Inch ==
 
== 5 1/4 Inch ==
Line 56: Line 102:
 
** [[PMC MicroMate floppy disk]]
 
** [[PMC MicroMate floppy disk]]
 
* Tandy
 
* Tandy
−
** TRS-80 Model I, II
+
** TRS-80 Model I, III, 4
 
*** [[TRS-80 single density 5.25" disk]]
 
*** [[TRS-80 single density 5.25" disk]]
 
*** [[TRS-80 double density 5.25" disk]]
 
*** [[TRS-80 double density 5.25" disk]]
 
** TRS-80 Color Computer
 
** TRS-80 Color Computer
−
*** [[TRS-80 Color Computer single density 5.25" disk]]
+
*** [[TRS-80 Color Computer single sided 5.25" disk]]
−
*** [[TRS-80 Color Computer double density 5.25" disk]]
+
*** [[TRS-80 Color Computer double sided 5.25" disk]]
 
* Texas Instruments
 
* Texas Instruments
 
** [[TI-99/4A 90K]]
 
** [[TI-99/4A 90K]]
Line 69: Line 115:
 
** [[ZX Spectrum Beta Disc 5.25" floppy]] (see [[TR-DOS filesystem]])
 
** [[ZX Spectrum Beta Disc 5.25" floppy]] (see [[TR-DOS filesystem]])
  
−
== 3 1/2 Inch ==
+
== 8 Inch ==
−
* Acorn
+
[[File:floppy-disks-8in.jpg|thumb|upright|[[Some 8" floppy disks]]]]
−
** [[Acorn double density 3 1/2" disk]]
+
* DEC
−
** [[Acorn high density 3 1/2" disk]]
+
** [[DEC RX01]]
−
* [[Akai Disk Format]]
+
** [[DEC RX02]]
−
* Amiga
+
* IBM
−
** [[Amiga double density disk]]
+
** [[IBM Type 1]] (33FD)
−
** [[Amiga high density disk]]
+
** [[IBM Type 2]] (43FD)
−
* Apple
+
** [[IBM Type 2D]] (53FD)
−
** [[Apple double-density 3 1/2" disk]]
+
** [[IBM 23FD]]
−
** [[Apple high-density 3 1/2" disk]]
+
** [[IBM 3740 format]]
−
* Commodore
+
−
** [[Commodore 1581 disk]]
+
−
* IBM PC and compatibles
+
−
** [[PC-DOS 720K format]]
+
−
** [[PC-DOS 1.44M format]]
+
−
** [[PC-DOS 2.88M format]]
+
−
* SAM Coupé
+
−
** [[SAM Coupé disk]]
+
−
* ZX Spectrum
+
−
** [[ZX Spectrum Beta Disc 3.5" floppy]] (see [[TR-DOS filesystem]])
+
−
 
+
−
== 3 Inch ==
+
−
* [[HP 3-inch disk]]
+
  
 
== Data encoding formats ==
 
== Data encoding formats ==
Line 107: Line 140:
 
* [http://wiki.icomp.de/wiki/Catweasel Catweasel]
 
* [http://wiki.icomp.de/wiki/Catweasel Catweasel]
 
* [http://www.cbmstuff.com/proddetail.php?prod=SCP SuperCard Pro]
 
* [http://www.cbmstuff.com/proddetail.php?prod=SCP SuperCard Pro]
 +
* [http://cowlark.com/fluxengine/index.html FluxEngine]
  
 
== Disk transfer info ==
 
== Disk transfer info ==

Latest revision as of 11:41, 5 September 2024

See also Filesystems, which are contained on Floppy Disks.
File Format
Name Floppy disk
Ontology

Some floppies, 5 1/4" and 3 1/2".

Some floppies, 5 1/4" and 3 1/2".

Formats for images of floppy disk data can be found at Disk Image Formats.

The main ways in which floppy disks could differ at a recording level:

  • The physical dimensions and physical layout – the most common sizes were 8-inch, 5¼-inch (officially the metric 130 mm, but in common parlance referred to by its inch approximation even in countries which normally use the metric system), 3½ inch (likewise officially metric 90 mm, but commonly known by the inch approximation). Note those are the sizes of the actual magnetic disk, the jacket/cartridge is larger. However, there were many other rare sizes.
  • The method of data encoding: the earliest floppies IBM 8-inch floppies used FM encoding. Capacity was doubled, without changing the disks physically, by switching to the more efficient MFM encoding. The original FM encoded disks were called "single density", and the MFM encoded "double density". IBM PC 5¼-inch and 3½ inch floppies used MFM encoding; the term "double density" was later extended to "high density" and beyond, but this time it referred to changes in the magnetic material and type of disk heads rather than an encoding change. GCR encoding was also popular, particularly with systems such as Apple IIs and Commodore 64s. Some early "double density" drives used M2FM encoding (most notably Intel ISIS-II and HP 9885) which was later replaced by the simpler MFM.
  • Magnetic recording material: more expensive media could store more data
  • Type of magnetic disk heads: more expensive magnets could store more data
  • Speed of rotation
  • Constant angular velocity (CAV) versus constant linear velocity (CLV)
  • Number of sides – early disks and drives were single-sided only and could only record on one side of the disk; later disks and drives were double-sided and supported recording on both sides. There were also "flippy disks" where a single-sided drive could be used to record on both sides of a disk by the user manually flipping the disk to access the other side.
  • Longitudinal magnetic recording versus perpendicular magnetic recording: traditionally floppies used longitudinal; 2.88 MB floppy drives doubled the capacity over 1.44MB by switching to perpendicular
  • Sector size: the earliest floppies had 128 byte sectors; IBM PC floppies normally had 512 byte sectors. IBM PC floppy controllers could support any power of 2 from 128 to 4096. Rarely, different tracks on a floppy could be recorded with different sector sizes, or even a single track with a mix of different sector sizes.
  • Gap length between sectors: reducing the gap length could squeeze more sectors on to the disk but at the risk of data loss
  • Format of track and sector headers, including CRC algorithms and any per-sector flags (e.g. IBM 3740 has a flag to mark each sector as "deleted", a feature carried forward into IBM PC floppy formats, but almost never used in them.)
  • Number of tracks per disk and number of sectors per track

A given combination of floppy disk controller, floppy drive, and disk, could generally support several different variations on the same basic format, but only within certain constraints – e.g. IBM PC floppies could be formatted with a non-standard sector size or number of tracks, but not with GCR or MMFM encoding (since the floppy disk controllers used in IBM PCs did not support those encodings).

The disk geometry, encoding, etc, is orthogonal to the filesystem – 1.44MB Apple Mac floppies were physically interoperable with IBM PC floppies, even though IBM PCs normally lacked software to read Apple's HFS filesystem; by contrast, the earlier 800KB and 400KB Apple Mac floppies were incompatible with IBM PC floppies, since IBM PC floppy drives could not physically read them, nor could those earlier Mac floppy drives physically read IBM PC floppies.

Contents

[edit] 2 Inch

[edit] 2 1/2 Inch

[edit] 3 Inch

[edit] 3 1/2 Inch

[edit] 4 Inch

[edit] 5 1/4 Inch

[edit] 8 Inch

Some 8" floppy disks

[edit] Data encoding formats

[edit] Devices to read floppy disks

[edit] Disk transfer info

[edit] Utilities

[edit] Other links and references

See also Disk Imaging Software & Systems.

Retrieved from "http://fileformats.archiveteam.org/index.php?title=Floppy_disk&oldid=49304"
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox